How to Use a Pole Saw – Pole Saw Guide
Pruning is necessary for the proper development of a tree. If you keep a tree pruned, it will be less likely to be destroyed by strong winds and storms. It will also help you avoid injuries and damage to your property.
Do you know the best time for pruning trees? It is the dormant season, which comes between late winter and early spring. During this time, trees can heal themselves quickly, because there are no leaves. You can easily prune young and tender branches.
But when a tree is fully grown, you will find it difficult to prune. In this case, it will not be very easy to reach the branches with a pruning saw. You have two options: either hire a professional or get the job done by yourself.
In this post, we will show you how you can prune trees using a pole saw. You are going to learn how to use a pole saw safely and effectively.
But what is a pole saw?
A pole saw is a saw on the end of a pole. It can be powered by gas, petrol, electricity or batteries. There are also pole saws that are non-powered. For pruning high tree branches, a pole saw is very useful.
It is not very easy to stand on a ladder and trim branches because in that case you often need to move the ladder. If you use a pole saw, you can safely and easily do the job while standing on the ground. It minimizes the effort because you don’t need to continually reposition the ladder.
Choosing the best pole saw
You need to consider some important things when you choose the best pole saw. Read our analysis: Best pole saw review, and you will easily choose the best pole saw, suitable for your work. Example, the size of your pole saw will depend on the height of the trees. You also need to measure the dimensions of the trees you are going to cut.
To cut thick branches, you will need larger bars. In order to keep the cutting blade sharp, buy a pole chain saw sharpener. Consider a lightweight saw because you will find it easy to carry. Keep in mind that petrol or gas-powered pole saws are heavier.
Additionally, you are advised to choose one best pole saw brands from famous brands, by searching in our following article.
The procedure of pruning trees using a pole saw
A few rules should be kept in mind while using a pole saw.
First of all, to avoid injury, clear the working site. If there are people or animals on the site, branches may fall on them and cause injury.
Make sure that there is no obstacle on the site. You need to feel comfortable while working.
There should also be an escape route in case of emergency. An escape route can save you from an accident or injury.
Avoid pruning tree branches close to a power line. If you happen to cut the line, the outcome can be disastrous.
As safety measures, consider wearing gloves and protective glasses.
Before you use a pole chain saw, sharpen it using a sharpener. You will find it easier to prune the branches with a sharp saw.
Make a good plan before you start working. It will save you from many hassles. To make sure that you are capable of holding the pole saw vertically and in a comfortable manner, position yourself properly.
Gravity should be on your side, and branches, in most cases, will be cut in a perpendicular way. You will need to exert more force when you are cutting against gravity. In these cases, you will be more prone to injury. So, be careful.
While you will find it easy to trim small branches, large branches will require more effort. Sometimes, to remove large branches from the tree, you will need three to four cuts. Make sure that the first cut is six to ten inches deep. If you approach the procedure in this way, cutting one third or half will not be a great deal.
Make the second cut close to the first cut. If you strike it away from the first cut, you will need more effort to remove the branch. Keep cutting downwards and the branch will gradually fell on the ground. You may need to reposition yourself to avoid any danger. After watching the branch carefully, move out if you need to. Step out of the place where it falls. Do not make the final cut if you find a branch collar growing from the stem. Pay close attention to the areas around the base of a branch.
You will do a bad job if you cut the collar. The collar contains cells which are necessary for healing the wounds after pruning. Trees, in general, can heal themselves. But sometimes you will need to prevent diseases by covering the wounds with latex. There are some insects that can attack the wounds if they are not covered.
To know more about the care of trees, it is a good idea to read some material on botany. Trees are living beings, and they have feelings. Your tree will rejuvenate itself if you keep the branch collar intact.
Your cutting area should be neatly arranged. If you let the branches pile up there, the place may become messy. To get the job done in an appropriate way, it is important to keep the space obstacle-free. It will benefit you because you will find a larger space to move around. If the space is larger, moving around will be easier for you. The fallen branches should be kept neatly arrange because these branches can be used as firewood.
Cutting large branches into smaller pieces requires significant effort. Now there are tree companies out there that do the job professionally. If you want to do it yourself, consider using a machine called wood splitting maul. The machine is designed to make the job easier.
How much time you will need depends on the scale of your project. If you have a significantly large area of trees to prune, it is a great idea to budget a portion of your time for the task.
Don’t lose heart if you find it difficult to use a pole saw. You will need some practice to be comfortable with pole saws. If you cut the small branches before the large ones, you will find it easy to cut the large ones. You will find enough space to attempt the ones that you may think hard to handle.
If you can do the job in a proper way, rest assured that your tree will heal itself pretty quickly. Stack the branches neatly after you have pruned all the overgrown branches and shrubs.
You should also keep in mind that if you can not reach the branches from the ground, think twice before making an attempt to prune the branches after climbing the tree. If you have never climbed a tree, trying to climb for the first time is a bad idea. Pruning is not essential; but if you are aesthetically sensitive, you can hire a professional tree company to prune the overgrown branches of your trees skillfully. They know how to avoid risks and prune in a proper way.
If you are going to use a pole saw for the first time, carefully read the instructions and cautions.
You can read more about how to use a circular saw.