How to choose the best table saw fence – Table Saw Fence Guide
A high quality table saw can significantly improve the quality of the cuts that you make. But if you do not have a table saw fence, you saw will waver and the cuts will look unprofessional.
When it comes to choosing a table saw fence, it may be a challenge for you to choose a good one because there are so many models out there. A poor quality fence will affect the quality of the cuts. The aim of this guide is to help you find a quality table saw fence – the best table saw fence.
When you are going to choose a table saw fence, you should consider how many parts you are making a day. There are two common types of fences are available: T-square type and sliding table saws. A T-square type fence system is square in shape and you can easily attach jigs and fixtures.
One the other hand, a sliding table saw fence slides back and forth. The miter gauge makes cuts without any problem. Using the microadjusters, you can easily adjust your fence.
If you want to know more about them, read Knowledge about table saw fence.
Why you should invest in a table saw fence
If you do not have a well-designed table saw fence, cutting will seem to be a chore to you. You will not find any pleasure in the task. Your cuts will be inaccurate and of poor quality.
Investing in the best table saw fence is of utmost importance because most table saw fences can not be locked parallel to the saw blade. Besides, most table saw fences lack accurate measuring scales.
When you choose a table saw fence, you should also make sure that the fence bars are long enough and your fence has adequate width ripping capacity. If you need to re-align it frequently, you will end up being exhausted. Make sure that it can be adjusted finely. You can also read the table saw fence reviews to understand this better.
The precision of the cuts you make largely depend on the quality of the saw fence. In order to make your cuts precise, make sure that your saw fence has enough reliability and precision. You also have to make sure that the fence can be accurately aligned with the blade. When a rip fence is locked in position, it is automatically aligned with the blade and you do not need to readjust it with the blade frequently. Proper alignment will determine not only a clean cut but also accurate ripping. Your safety also depends on proper alignment.
The most important thing is to check the parallel alignment of the fence. But to do that, you need some information about the miter slot of the table saw. You must make sure that the blade is in parallel alignment with not only the fence but also the miter slot. You can not adjust the miter slot; so you need to align the blade with the miter slot.
A table saw fence mainly works as a guide that allows you to make accurate cuts. The fence should be adjusted along the length of the table. The fence also ensures that the material is square to the table. It prevents kickback, and in that sense it is a safety feature. You will soon become frustrated if you choose a poor quality fence. So make sure that the construction materials of the fence are good, and the design is perfect. You should also pay attention to the positioning scale.
What is the best table saw fence?
When it comes to choosing a table saw fence, there are plenty of different options out there. To make sure that you are making a good decision, you need to know what makes a good table saw. We are going to help you choose the best table saw fence.
You have to consider some important things before making a decision to purchase a table saw. Here are a few best brands:
Shop Fox W1716 Aluma-Classic Fence with Standard Rails, 57-Inch
Made of steel and aluminum, this T-square fence is designed by Shop Fox. The fence weighs about 53.3 pounds, and it’s 61 inches long. This fence is a good fit for table saws that are 60 inches wide. The fence has a rectangular cross section. Its measurement is 17.2 inches by 7 inches. The table saw fence has no rear support rail and only a one-point locking system.
You can accurately read the measurements and lock the fence because the lens is well-positioned and it is located on top of the calibration marks of the scales.
Because of the micro-adjustment capabilities of the rip fence, you can make very precise cuts. The surfaces of the fence are smooth because they are made of aluminum.
Bosch Parts 2610950148 Rip Fence Assembly
Designed and marketed by Bosch, this T-square type rip fence weighs 5.3 pounds and the length of the fence bar is 29 inches. The rectangular cross section is 7 inches by 5 inches. You can attach its well-designed guide to any table saw. It also allows you to perform any type of wood ripping woodwork because the maximum rip capacity of the fence is 30 inches.
This table saw fence has a single-point locking system and no support rail. Using a locking clamp, you can clamp down the fence easily. Made of high-quality and durable materials, this table saw fence is also known for its durability.
This table saw fence system is easy to set up and you can correctly position it on the table.
DELTA 36-T30 T2 30-Inch Fence and Rail System
Designed and marketed by Delta Machinery, this T-square type of rip fence is 30 inches in length. The fence weighs about 30 pounds. The square cross section of the fence is 3 inches by 3 inches. This fence is suitable for table saws that are 60 inches wide. The rip capacity is up to 30 inches.
This T-square fence has a 3-point locking system. The rip fence bar slides on a short guide tube. Using the clamping device and scale, you can clamp the fence precisely.
You will be provided with mounting hardware with the fence. When you use the table saw fence, it is easy to maintain its position because of its locking system. With the help of this fence, you can rapidly reproduce pieces of the same width.
Things to consider when choosing a table saw fence system
As a tool, a table saw fence is fundamental to your setup. It will be difficult for anybody to achieve great results if a lousy fence is combined with a good table saw. A table saw fence also helps you sustain repeat cuts. These are the factors you should consider when choosing the best table saw fence:
Size is one of the most important factors to consider when choosing the best table saw fence. Your table saw fence should accommodate the materials you are cutting. If you have a large fence but a small saw, you will not find it comfortable to work with the machine.
Ease of installation
Will you like a system that is difficult to install? No. If a table saw fence is not that difficult to install, you should be able to install it under 30 minutes. If the system has added features, you will end up taking longer to install it. Before buying a table saw fence, make sure that it is easy to install.
One of the most important features of the best table saw fence is that it allows you to make your cuts accurately. This variable should be taken seriously. Whatever your purpose is, fine adjustments are of utmost importance.
When you make repeated cuts, the system should stay aligned. If it doesn’t you should not choose that table saw fence, because probably it has a design flaw. Read the user reviews to know what other users say about the table saw fence. If you find that the other users have praised the table saw fence, you can make a decision to purchase the fence.